The advantage of the rubber powdering feed strips for extruder or injection molding machines is that you receive a clean and even surface from the strips, which does not cause any problems in the feed units of extruder or injection molding machines. . Compared to liquid release solutions, dry powder applied gives you the assurance of optimal handling of the strips without sticking together.

• Powder application: by injection of powder with jets on both sides of the belt
• Dust is conveyed and blown by a single inlet centrifugal blower
• Ventilation device
• Fan frequency control to adjust the amount of powder applied to the belt
• 1 set of 2 counter-rotating brushes inside the machine head to level the dust on the surface and lightly press the dust onto the material
• Frequency control of brush speed to adjust cleaning intensity
• Adjustment of the distance between the brushes and the belt
• Stainless steel dust tank
• Suction system with filter cartridge and cleaning by pulsed air jet.
• Aspiration ventilation device