Skip to content
NEW MACHINES
Close NEW MACHINES
Open NEW MACHINES
Preparation and mixing
Internal mixers
Two-roll mills
Strainers (cold feed / hot feed)
Automatic weighing and feeding systems
Mixing line control and automation
Batch-off coolers, Roto-strip
Bale cutters, strip cutters, slab cutters
Calenders and peripherals
Powdering Machines
Palletizers / Stackers
Extrusion and vulcanization
Cold feed / Hot feed extruders
Extrusion lines for profiles and tubes
Vulcanization tunnels (UHF, hot air, salt bath)
Autoclaves
Preformers
Profile Powdering Machines
Electrostatic flocking units
Cooling units
Temperature control units (TCU)
Molding and Injection
Injection molding presses
Compression presses
Splicing presses
C-frame presses
Finishing and cutting area
Finishing cutting machines
Cryogenic deflashing systems (plastic media blasting)
Marking and measuring machines
Automatic cutting machines for extruded rubber products
Multi-station rotary table machines
Gasket washing machines
O-ring grinding machines
Laboratory and Quality Control
Rheometers and viscometers
Dynamometers and durometers
Characterization equipment
Laboratory presses
Recycling and circular economy
Twin-shaft shredders
Granulators
Pulverizers
Cutters
Separators
Conveyors
USED MACHINES
TECHNICAL SERVICE
CONTACT
LANGUAGES
Close LANGUAGES
Open LANGUAGES
>
>
NEW MACHINES
Close NEW MACHINES
Open NEW MACHINES
Preparation and mixing
Internal mixers
Two-roll mills
Strainers (cold feed / hot feed)
Automatic weighing and feeding systems
Mixing line control and automation
Batch-off coolers, Roto-strip
Bale cutters, strip cutters, slab cutters
Calenders and peripherals
Powdering Machines
Palletizers / Stackers
Extrusion and vulcanization
Cold feed / Hot feed extruders
Extrusion lines for profiles and tubes
Vulcanization tunnels (UHF, hot air, salt bath)
Autoclaves
Preformers
Profile Powdering Machines
Electrostatic flocking units
Cooling units
Temperature control units (TCU)
Molding and Injection
Injection molding presses
Compression presses
Splicing presses
C-frame presses
Finishing and cutting area
Finishing cutting machines
Cryogenic deflashing systems (plastic media blasting)
Marking and measuring machines
Automatic cutting machines for extruded rubber products
Multi-station rotary table machines
Gasket washing machines
O-ring grinding machines
Laboratory and Quality Control
Rheometers and viscometers
Dynamometers and durometers
Characterization equipment
Laboratory presses
Recycling and circular economy
Twin-shaft shredders
Granulators
Pulverizers
Cutters
Separators
Conveyors
USED MACHINES
TECHNICAL SERVICE
Contact
Home
/
Extrusion and vulcanization
/
Cold feed / Hot feed extruders
/ Hot & Cold Feed Rubber Extruders
Home
/
Extrusion and vulcanization
/
Cold feed / Hot feed extruders
/ Hot & Cold Feed Rubber Extruders
Hot & Cold Feed Rubber Extruders
Cold Feed Rubber Extruders
Screw diameter:
from 32 mm to 300 mm.
Length/Diameter ratio (L/D):
from 12:1 to 22:1.
Available models:
Standard extruders.
Pin-barrel extruders.
Conical extruders.
Vented extruders (degassing systems).
Silicone extruders.
Co-extrusion units (dual or multiple).
Custom options.
Applications:
Rubber profiles, tubes, and hoses.
Reinforced and non-reinforced hoses.
Wire and cable coating.
Tires and V-belt components.
Seals, gaskets, and rubber roller covering.
Inner tubes and hoses for bicycles and automotive.
Flame-retardant (fire-resistant) hoses.
Silicone products for medical and surgical use.
Molding preforms (gaskets/seals).
Calender feeding and raw rubber straining.
Hot Feed Rubber Extruders
Single-screw design
with or without conical screw feeder.
Twin-screw device
with or without straining, with or without rollers, etc.
Tailored solutions
to fit your specific production needs.
WhatsApp us
